Помощь В Настройке RB751U-2HnD (Default)

Раскажем как же происходит базовая настройка RB751U-2Hn Mikrotik. Данная информация была озвучена на последней конференции MUM в Лас Вегасе и теперь доступна каждому пользователю. #| ether1 переименован на ether1-gateway
#| DHCP client и masquerade установлены на ether1-gateway
#| ether2 переименован на ether2-master-local and configured as switch master port for ether3-ether5
#| ether2-master-local и wlan1 в bridged
#| wireless установлен как access point в 2412MHz используя два потока и включен extension channel.
#| IP address 192.168.88.1/24 и DHCP server установлены в bridge interface
#| DHCP servers address pool - 192.168.88.10-192.168.88.254

:global action;
:local dhcpEnabled 0;
:local wirelessEnabled 0; #проверка wireless и пакетов dhcp
:if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
:set dhcpEnabled 1;
}
:if ([:len [/system package find name="wireless" !disabled]] != 0) do={
:set wirelessEnabled 1;
} # Примените конфигурацию.
# эти команды выполняются после инсталляции или сброса конфигурации

:if ($action = "apply") do={
# дождитесь интерфейсов
:while ([/interface ethernet find] = "") do={ :delay 1s; };
:if ( $wirelessEnabled = 1) do={
# дождитесь беспроводных настроек
:local count 0;
:while ([/interface wireless find] = "") do={
:set count ($count +1);
:if ($count = 60) do={
:log warning "DefConf: Unable to find wireless interface";
/ip address add address=192.168.88.1/24 interface=ether1;
/quit
}
:delay 1s;
};
/interface wireless set wlan1 mode=ap-bridge band=2ghz-b/g/n ht-txchains=0,1 ht-rxchains=0,1 \
disabled=no country=no_country_set wireless-protocol=any
/interface wireless set wlan1 channel-width=20/40mhz-ht-above ;
} /interface set ether1 name="ether1-gateway";
:if ( $dhcpEnabled = 1) do={
/ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration";
} /interface {
set ether2 name=ether2-master-local;
set ether3 name=ether3-slave-local;
set ether4 name=ether4-slave-local;
set ether5 name=ether5-slave-local;
}
/interface ethernet {
set ether3-slave-local master-port=ether2-master-local;
set ether4-slave-local master-port=ether2-master-local;
set ether5-slave-local master-port=ether2-master-local;
} /interface bridge
add name=bridge-local disabled=no auto-mac=no protocol-mode=rstp;
:local bMACIsSet 0;
:foreach k in=[/interface find] do={
:local tmpPortName [/interface get $k name];
:if (!($tmpPortName~"bridge" || $tmpPortName~"ether1"|| $tmpPortName~"slave")) do={
:if ($bMACIsSet = 0) do={
:if ([/interface get $k type] = "ether") do={
/interface bridge set "bridge-local" admin-mac=[/interface ethernet get $tmpPortName mac-address];
:set bMACIsSet 1;
}
}
/interface bridge port
add bridge=bridge-local interface=$tmpPortName;
}
} /ip address add address=192.168.88.1/24 interface=bridge-local comment="default configuration";
:if ($dhcpEnabled = 1) do={
/ip pool add name="default-dhcp" ranges=192.168.88.10-192.168.88.254;
/ip dhcp-server
add name=default address-pool="default-dhcp" interface=bridge-local disabled=no;
/ip dhcp-server network
add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration";
}
/ip firewall {
filter add chain=input action=accept protocol=icmp comment="default configuration"
filter add chain=input action=accept connection-state=established comment="default configuration"
filter add chain=input action=accept connection-state=related comment="default configuration"
filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration"
nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration"
}
/tool mac-server remove [find];
/tool mac-server mac-winbox disable [find];
:foreach k in=[/interface find] do={
:local tmpName [/interface get $k name];
:if (!($tmpName~"ether1")) do={
/tool mac-server add interface=$tmpName disabled=no;
/tool mac-server mac-winbox add interface=$tmpName disabled=no;
}
}
/ip neighbor discovery set [find name="ether1-gateway"] discover=no
/ip dns {
set allow-remote-requests=yes
static add name=router address=192.168.88.1
} }
# Вернитесь в конфигурацию.
# эти команды выполняются, если пользователь запрашивает, перемещение типовой конфигурации

:if ($action = "revert") do={
# убрать защиту wan портов
/ip firewall {
:local o [nat find comment="default configuration"]
:if ([:len $o] != 0) do={ nat remove $o }
:local o [filter find comment="default configuration"]
:if ([:len $o] != 0) do={ filter remove $o }
}
/tool mac-server remove [find]
/tool mac-server add interface=all disabled=no
/tool mac-server mac-winbox remove [find interface!=all]
/tool mac-server mac-winbox set [find] disabled=no
# сбросить wan порты;
/ip neighbor discovery set [find name="ether1-gateway"] discover=yes
/interface set "ether1-gateway" name=ether1;
:if ($dhcpEnabled = 1) do={
:local o [/ip dhcp-server network find comment="default configuration"]
:if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
:local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface="bridge-local" !disabled]
:if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
/ip pool {
:local o [find name="default-dhcp" ranges=192.168.88.10-192.168.88.254]
:if ([:len $o] != 0) do={ remove $o }
}
:local o [/ip dhcp-client find comment="default configuration"]
:if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
}
/ip dns {
set allow-remote-requests=no
:local o [static find name=router address=192.168.88.1]
:if ([:len $o] != 0) do={ static remove $o }
}
/ip address {
:local o [find comment="default configuration"]
:if ([:len $o] != 0) do={ remove $o }
}
# удалить switch
/interface set ether2-master-local name=ether2;
/interface ethernet set ether3-slave-local master-port=none;
/interface set ether3-slave-local name=ether3;
/interface ethernet set ether4-slave-local master-port=none;
/interface set ether4-slave-local name=ether4;
/interface ethernet set ether5-slave-local master-port=none;
/interface set ether5-slave-local name=ether5;
/interface bridge port remove [find bridge="bridge-local"]
/interface bridge remove [find name="bridge-local"]
:if ($wirelessEnabled = 1) do={
/interface set [find name~"wlan1"] name=wlan1
/interface wireless reset-configuration wlan1
} }

Помощь в настройке RouterOS Mikrotik - Далее =>